WELCOME TO REACON
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
REACON
| Quantity: | |
|---|---|
REACON Guy Clips are mechanical fastening components used in utility pole guying systems and overhead line construction. They provide a clamping connection for securing down guys and can also be used with suitable grounding components to connect ground wire to a ground rod.
The product is available with either a forged steel base or a malleable iron base, offering different structural options for utility hardware assemblies. Its clamping configuration is designed to hold the specified strand or wire within the assembly.
The steel components are hot-dip galvanized with reference to ASTM A153 requirements for outdoor utility applications. Different models are available for strand sizes ranging from 5/16 inch to 3/4 inch.
REACON supplies five listed stock numbers: G0415-516, G0415-38, G0415-12, G0415-58, and G0415-34. Customers can select the corresponding model according to the strand size and installation requirements.
1. Forged Steel Base Guy Clip
The forged steel base configuration is designed for guy wire fastening applications in utility pole assemblies. Its base provides the structural support for the clamping components.
It can be selected according to the required strand size and the specified connection arrangement.
2. Malleable Iron Base Guy Clip
The malleable iron base configuration provides an alternative construction for guy wire fastening. It is suitable for utility hardware applications where this base structure is specified.
The selection between forged steel and malleable iron should be based on the approved product drawing and project requirements.
3. Different Strand Size Options
REACON provides five listed configurations for different strand diameters. Selecting the correct model helps ensure that the clamping components match the intended strand size.
Available strand sizes include:
5/16 inch
3/8 inch
1/2 inch
5/8 inch
3/4 inch
| Item | Description |
| Product Name | Guy Clip / Guy Wire Clip |
| Product Category | Pole Line Hardware |
| Base Options | Forged Steel Base / Malleable Iron Base |
| Material | Steel or malleable iron, depending on configuration |
| Surface Treatment | Hot Dip Galvanized |
| Coating Reference | ASTM A153 |
| Available Strand Sizes | 5/16, 3/8, 1/2, 5/8, 3/4 inch |
| Available Stock Numbers | G0415-516, G0415-38, G0415-12, G0415-58, G0415-34 |
| Main Function | Guy wire fastening and grounding connection applications |
| Application | Utility poles and overhead line structures |
| Customization | Subject to confirmed drawings and technical requirements |
The following table summarizes the available stock numbers, strand sizes, approximate shipping weights, and standard packaging information.
Model Selection Notes:
• G0415-516: For 5/16-inch strand applications.
• G0415-38: For 3/8-inch strand applications.
• G0415-12: For 1/2-inch strand applications.
• G0415-58: For 5/8-inch strand applications.
• G0415-34: For 3/4-inch strand applications.
The listed weights are approximate shipping weights per 100 pieces, not individual product weights. Actual packing quantities should be confirmed in the commercial quotation.
Two Base Construction Options
The forged steel and malleable iron base configurations provide alternative structural choices for different utility hardware requirements. Customers can specify the required construction when requesting a quotation.
Multiple Strand Size Configurations
Five stock numbers cover strand sizes from 5/16 inch to 3/4 inch. This range allows customers to select a suitable clip configuration for the intended guy strand.
Designed for Mechanical Clamping
The clip is used to secure the specified wire or strand within a fastening assembly. Correct model selection and proper installation are important for maintaining the intended connection.
Hot-Dip Galvanized Surface
The galvanized finish provides a zinc coating that helps protect the metal surface against outdoor environmental exposure. Coating requirements can be specified with reference to ASTM A153.
Practical Packaging Options
Different standard carton quantities are available according to the product model, helping customers plan purchasing quantities and shipment arrangements.
1. Utility Pole Guying Systems
Guy clips are used in down-guy arrangements to secure guy strands as part of the supporting hardware assembly for utility poles.
2. Overhead Power Distribution Networks
They are applied in overhead distribution construction where mechanical guy wire connections are required to support pole structures.
3. Telecommunication Poles and Towers
The product can be used in compatible guying arrangements for communication poles and tower structures.
4. Ground Wire Connection
A suitable clamping configuration can be used as part of a grounding connection to secure ground wire to a ground rod. The selected components must be compatible with the grounding design.
5. Utility Infrastructure Maintenance
Guy clips can be used in maintenance or replacement work when an existing guy wire fastening component needs to be replaced with a compatible specification.
Correct model selection and assembly are important for the intended clamping function.
1. Identify the Strand Size: Measure or confirm the nominal diameter of the guy strand before selecting a model.
2. Select the Stock Number: Choose the corresponding model from the G0415 series according to the strand size.
3. Confirm the Base Configuration: Check whether the project requires a forged steel base or a malleable iron base.
4. Inspect the Components: Check the clip, fastening components, and contact surfaces for visible damage before installation.
5. Position the Strand: Place the strand into the designated clamping position according to the product drawing.
6. Assemble the Fasteners: Install the specified fastening components and tighten them according to the manufacturer’s instructions.
7. Check the Connection: Inspect the strand position, clamping arrangement, and fastening condition before the assembly is put into service.
For grounding applications, confirm that the selected clip and connected components are suitable for the specified grounding conductor and installation design.
REACON can arrange product inspection according to the confirmed technical specifications and customer requirements.
Relevant inspection items may include:
• Base material and structural appearance
• Product dimensions and component fit
• Compatibility with the specified strand size
• Fastener condition and assembly
• Hot-dip galvanized surface appearance
• Zinc coating thickness, where specified
• Packaging quantity and product identification
Additional testing requirements and inspection documents can be discussed before production.
To help identify the correct guy clip, customers are advised to provide the following details:
| Selection Item | Required Information |
| Product Type | Guy Clip |
| Base Construction | Forged Steel or Malleable Iron |
| Strand Size | 5/16 to 3/4 inch |
| Stock Number | G0415 series |
| Surface Treatment | Hot Dip Galvanized |
| Coating Reference | ASTM A153 |
| Application | Down Guy or Ground Wire Connection |
| Quantity | Required order quantity |
| Technical Drawing | Recommended for configuration confirmation |
Q1: What is a guy clip used for?
A guy clip is used to secure guy strands in utility pole guying arrangements. It can also be used in suitable configurations for connecting ground wire to a ground rod.
Q2: What models are available?
The listed models are G0415-516, G0415-38, G0415-12, G0415-58, and G0415-34.
Q3: What strand sizes are supported?
The available strand sizes are 5/16, 3/8, 1/2, 5/8, and 3/4 inch.
Q4: What is the difference between forged steel and malleable iron base configurations?
They use different base construction methods and materials. The appropriate version should be selected according to the product drawing and project requirements.
Q5: Is the guy clip hot-dip galvanized?
Yes. The product is offered with a hot-dip galvanized surface treatment, with ASTM A153 as the coating reference.
Q6: Can the guy clip be used for grounding connections?
It can be used in suitable configurations to clamp ground wire to a ground rod. The connection must be checked against the grounding system design.
Q7: How can I select the correct model?
Confirm the strand diameter first, then select the corresponding G0415 stock number. If the base construction or installation arrangement is not clear, provide a drawing or photograph for confirmation.
Q8: Can REACON provide customized specifications?
Please send the required strand size, base configuration, quantity, and technical drawing. REACON can review the requirements and confirm the available options.
REACON supplies guy clips, guy attachments, anchor hardware, and other pole line fittings for overhead power transmission and distribution projects.
For product inquiries, please provide the required stock number, strand size, base configuration, and order quantity. Our team can help confirm the appropriate guy clip for your installation.
