What should I do if the interface of the cable clamp fails?

Firstly, check if the interface is securely fastened. If there is any looseness, tighten it again. If the internal components of the interface are damaged, it is necessary to replace the new cable clamp or repair the damaged part. Meanwhile, pay attention to keeping the interface clean and dry to prevent corrosion and oxidation.

Why can't the wire clamp firmly fix the wire during installation or use?

Check if the screws are loose or worn, and replace them with new ones if necessary. If the clamp design is unreasonable or severely damaged, a new clamp needs to be replaced.

Does the wire clamp experience abnormal heating during normal use?

Regularly inspect and replace aging wires to avoid connection failure and safety hazards caused by wire aging. When choosing new wires, pay attention to selecting products with reliable quality and compliance with standards.

What should I do if there is looseness or detachment at the connection between the wire clamp and the wire or equipment?

Strengthen quality control during the installation process to ensure that the connection between the wire clamp and the wire or equipment is firm and reliable. During long-term use, regularly check if the connections are loose or detached, and promptly reinforce them.

Cable Line Accessories

Home » Hot » Cable Line Accessories

Why Use Clamp？
Applicable Scenarios
Solution
Case
FAQ

Why Use Clamp？

Connection&Fixation

Connecting wires and appliances: Wire clamps are used to connect wires and electrical appliances such as plugs, switches, sockets, etc., allowing electrical appliances to be powered on and work together.
Connecting wires and conductors: Wire clamps can also be used to connect two or more wires, allowing the circuit to be extended and expanded, achieving power transmission.
Fixed wires: By selecting appropriate wire clamps, it is possible to ensure that the wires are stably fixed in the equipment, preventing circuit failures caused by loose or detached wires.
Security Protection

Preventing short circuits: They isolate wires from objects that may cause short circuits through barriers, thereby protecting the safety of the circuit.
Protecting wires: The design of wire clamps often protects wires from external environmental damage, such as wear and corrosion.
Improve Performance

Improve signal transmission accuracy: The use of wire clamps on critical equipment such as high-speed trains and airplanes can effectively improve the accuracy and safety of signal transmission.
Simplify circuit structure: By using different types of wire clamps, the structure and layout of the circuit can be simplified.

Applicable Scenarios

Connection and fixation of power lines:
1. Wire clamps are widely used in power lines to connect and secure wires, ensuring the continuity and stability of power transmission.
2. Suspension clamps are mainly used to fix wires on insulator strings of straight towers, support and disperse forces; Tension clamps are used to fix the grounding wires of load-bearing towers, withstand tension, and share loads.

Connection of electrical equipment:
In power facilities such as substations, wire clamps are used to connect the busbar down conductors with the outgoing terminals of electrical equipment (such as transformers, circuit breakers, isolating switches, etc.), achieving the transmission and distribution of electrical energy.

Application in special environments:
Under adverse weather conditions or strong electric field interference, the wire clamp can maintain stable electrical and mechanical performance, ensuring the normal operation of the power system.

Maintenance and renovation:
Wire clamps also play an important role in the maintenance and renovation of power lines. By replacing or adjusting the wire clamp, it is easy to repair damaged lines or change the layout of the lines.

Aluminum Copper Stirrup Clamp

Bail Clamp is one of the most popular type of Aluminum Connectors for connecting with Copper or Aluminum wire.

Aluminum Suspension Clamp

Suspension clamp is an electrical fixture used to suspend wires or lightning conductors on insulator strings or towers of straight lines, mainly bearing vertical loads to ensure the stable operation of power lines.

Alumininum Alloy Hot Line Clamp

RE Hot Line Clamps are cast with high conductvity aluminum alloy compatible with any aluminum covered conductor.An enclosed compression spring on the eye screw thread in the clamp run provides vibration resistant connections.

Alumininum Alloy Hot Line Clamp

Solution

Transmission lines: In high-voltage transmission lines, clamps are used to connect wires, reduce the distance between clamps, etc., to ensure the safety and stability of the transmission lines.

Substation: In the substation, wire clamps are used to connect wires in equipment such as transformers, isolating switches, and combination devices, ensuring the normal transmission of current and voltage.

Cable joint: At the cable connection point, the cable clamp can seamlessly connect the cable to avoid loose joints or cable detachment.

Circuit connection: In electronic and electromechanical devices, wire clamps are used to connect and secure wires in the circuit, ensuring the normal operation of the circuit. Different types of wire clamps, such as insulated wire clamps and exposed wire clamps, can meet the connection requirements of different circuits.

Lighting system: In the lighting system, wire clamps are used to connect and secure the wires of the lamps, ensuring that the lamps can work stably.

Case

Great, our company has adopted the double suspension line clamp technology, successfully solving the problem of sagging caused by the self weight of large-span transmission lines!

Liam
I am very confident in the products of Weikang Company. We purchased wire clamps and adopted suspension wire clamp technology, successfully completing the upgrade and renovation of the internal electrical system.

Leo
Solved my urgent need! We have used suspension clamp technology on the railways in our city, which has improved the reliability and safety of power and signal lines.

William

FAQ

Q What should I do if the interface of the cable clamp fails?

Firstly, check if the interface is securely fastened. If there is any looseness, tighten it again. If the internal components of the interface are damaged, it is necessary to replace the new cable clamp or repair the damaged part. Meanwhile, pay attention to keeping the interface clean and dry to prevent corrosion and oxidation.
Q Why can't the wire clamp firmly fix the wire during installation or use?

Check if the screws are loose or worn, and replace them with new ones if necessary. If the clamp design is unreasonable or severely damaged, a new clamp needs to be replaced.
Q Does the wire clamp experience abnormal heating during normal use?

Regularly inspect and replace aging wires to avoid connection failure and safety hazards caused by wire aging. When choosing new wires, pay attention to selecting products with reliable quality and compliance with standards.
Q What should I do if there is looseness or detachment at the connection between the wire clamp and the wire or equipment?

Strengthen quality control during the installation process to ensure that the connection between the wire clamp and the wire or equipment is firm and reliable. During long-term use, regularly check if the connections are loose or detached, and promptly reinforce them.

Why Use Clamp？

Applicable Scenarios

Aluminum Copper Stirrup Clamp

Aluminum Suspension Clamp

Alumininum Alloy Hot Line Clamp

Alumininum Alloy Hot Line Clamp

Solution

Case

FAQ

Q What should I do if the interface of the cable clamp fails?

Q Why can't the wire clamp firmly fix the wire during installation or use?

Q Does the wire clamp experience abnormal heating during normal use?

Q What should I do if there is looseness or detachment at the connection between the wire clamp and the wire or equipment?

Quick Links

Product Category