REACON
| Availability: | |
|---|---|
| Quantity: | |
RE Straight Line Strain Clamp are for distribution and light transmission construction with all Aluminum, ACSR or aluminum alloy conductor. These clamps have high holding power and large range taking ability.
- Convenient installation: Don't need to use special tools, do not need to cut the wire.
- We do not need to cute the wire, reduced the electrical contact point, low loss, energy-saving effect of transmission line is more significant.
- Safety and reliability for greatly increased.
- The body and the wedge core of Bolt Type Strain Clamp is made of high strength aluminum alloy materials, can provide more grip and failure load.
- Have self-locking function, the wire is pulled tight trend. The product can be reused after removal.
REACON Aluminum Alloy Straight Strain Clamp Series is designed for securing and anchoring conductors in overhead power transmission and distribution networks. The product range includes multiple NLL configurations developed to accommodate different conductor diameters and mechanical loading requirements.
These clamps are suitable for aluminum conductors, ACSR conductors, and compatible aluminum alloy conductors used in overhead electrical installations.
The main clamping structure consists of a high-strength aluminum alloy body and wedge components. Through a bolt-operated gripping arrangement, the conductor is held firmly within the clamp assembly, creating a mechanical connection between the conductor and the supporting line hardware.
Compared with conventional fastening methods that require conductor cutting, the bolt-type structure allows installation without cutting the conductor. This helps maintain conductor continuity and reduces unnecessary intervention during line construction.
The NLL series provides different dimensional configurations, allowing utility contractors and electrical equipment distributors to select suitable products according to conductor diameter, required tensile strength, and installation conditions.
In addition to the standard aluminum alloy configuration, REACON can discuss different connecting hardware arrangements according to project drawings and technical requirements.
The REACON NLL aluminum alloy strain clamp range covers multiple conductor sizes and mechanical load ratings.
The following table summarizes the specifications listed in the original product catalog.
| Catalog No. | Conductor Dia. (mm) | Dimensions (mm) | Breaking Load (KN) | Weight (kg) | |||
| M | C | L1 | L2 | ||||
| NLL-1 | 5.1-11.5 | 16 | 19 | 140 | 120 | 40 | 1.0 |
| NLL-2 | 8.9-18.5 | 16 | 24 | 176 | 187 | 40 | 1.6 |
| NLL-3 | 5.0-15.0 | 16 | 18 | 310 | 160 | 70 | 1.9 |
| NLL-4 | 12.1-21.8 | 16 | 30 | 298 | 284 | 90 | 4.1 |
| NLL-5 | 18.0-30.0 | 22 | 36 | 446 | 342 | 120 | 7.0 |
| NLL-6 | 27.0-38.0 | 22 | 44 | 560 | 360 | 120 | 8.1 |
| NLL-2A | 7.0-16.0 | 16 | 20 | 111 | 137 | 40 | 1.6 |
| NLL-4A | 12.0-21.8 | 16 | 30 | 298 | 292 | 102 | 3.9 |
| NLL-5A | 18.0-30.0 | 16 | 32 | 190 | 235 | 70 | 3.9 |
| NLL-6A | 27.0-38.0 | 16 | 36 | 296 | 255 | 70 | 4.0 |
Note: Dimensions are presented according to the original product table. The mechanical ratings and conductor compatibility should be reconfirmed against the corresponding engineering drawings before final procurement.
Another NLL configuration table is provided in REACON’s tension strain clamp product range.
| Model | Stranded Wire Diameter (mm) | U-Bolt Quantity | U-Bolt Diameter | Ultimate Tensile Strength (kN) |
| NLL-1 | 5.0–10.0 | 2 | M10 | 40 |
| NLL-2 | 10.1–14.0 | 2 | M12 | 40 |
| NLL-3 | 14.1–18.0 | 3 | M12 | 70 |
| NLL-4 | 18.1–23.0 | 3 | M12 | 90 |
| NLL-5 | 23.1–29.0 | 5 | M12 | 120 |
This table represents an additional configuration reference rather than a direct replacement for the dimensional table above. Models with the same NLL designation may have different specifications depending on the clamp design and drawing revision.
Customers should identify the required structure and verify the corresponding technical drawing before ordering.
High-Strength Aluminum Alloy Clamp Body
The main body is manufactured from high-strength aluminum alloy to provide mechanical support for overhead conductor anchoring.
The aluminum alloy structure offers a balance between mechanical strength and component weight, making it suitable for utility installation work where both load capacity and handling efficiency are important.
Aluminum Alloy Wedge Components
The wedge core works together with the clamp body to create the conductor gripping arrangement.
When the fastening components are tightened correctly, the wedge structure helps distribute the gripping force across the designated contact area.
The self-locking configuration is designed to maintain conductor retention under the specified mechanical loading conditions.
Bolt-Type Fastening Arrangement
The bolt-type structure provides a mechanical fastening method for conductor installation.
It allows the clamp to be assembled without cutting the conductor, helping maintain conductor continuity and simplifying installation procedures.
Connecting Hardware Options
Depending on the selected configuration, associated hardware may include:
• Galvanized steel U-bolts.
• Clevis pins.
• Ductile iron socket eyes and clevises.
• Stainless steel cotter pins.
• Other connecting components required by the installation drawing.
The exact component materials and surface treatments depend on the selected assembly configuration and customer specifications.
Secure Conductor Retention
The aluminum alloy body and wedge components work together to hold the conductor in position.
The gripping structure is intended to resist conductor movement under the specified tensile loading conditions.
Installation Without Conductor Cutting
The bolt-type design allows the conductor to be secured without cutting the wire.
This reduces unnecessary conductor preparation and helps preserve the continuity of the installed line.
Multiple Conductor Size Options
The NLL series includes different configurations for various conductor diameters.
This allows customers to select suitable fittings for different overhead distribution and light transmission projects.
Mechanical Load Adaptability
Different NLL models offer different rated breaking loads.
Selecting the appropriate configuration requires matching the conductor diameter, expected mechanical tension, and engineering requirements of the overhead line.
Reusable Structural Design
The original product description identifies a reusable feature after removal.
Reuse should only be considered when the clamp and all associated components remain undamaged and pass the applicable inspection requirements.

Overhead Distribution Lines
Aluminum alloy strain clamps are used to anchor conductors at designated tension points in overhead distribution networks.
They provide a mechanical connection between the conductor and supporting insulator or pole hardware assembly.
Light Transmission Line Construction
The NLL series can be considered for light transmission line projects involving compatible aluminum and ACSR conductors.
Different model configurations allow selection according to conductor dimensions and mechanical requirements.
Dead-End Pole Installations
At terminal poles, the strain clamp secures the conductor and transfers mechanical tension to the supporting structure.
This helps maintain the designed conductor arrangement at the end of an overhead line section.
Angle Pole and Tension Sections
At line direction changes and designated tension sections, appropriate strain clamps are used to maintain conductor anchoring and mechanical stability.
Utility Network Expansion
During overhead network extensions and equipment upgrades, NLL strain clamps provide conductor termination options for compatible existing and new line structures.
A complete strain clamp assembly may require several connecting components to establish a mechanical link between the conductor and the insulator string or pole structure.
Common connection arrangements include:
Clevis Connection
A clevis provides a connecting interface between the clamp assembly and compatible line hardware.
Socket Eye Connection
Socket eyes can be used as part of the mechanical connection system where the project design requires a compatible socket-type fitting.
Galvanized Steel Hardware
Galvanized steel components are used in selected configurations to provide mechanical connection and outdoor corrosion protection.
Stainless Steel Cotter Pins
Cotter pins help secure compatible pin connections and prevent unintended component separation.
The final hardware arrangement should follow the approved assembly drawing and required mechanical rating.
Choosing an appropriate NLL strain clamp requires matching the product specification with the actual conductor and line design.
The following factors should be considered:
1. Conductor Type: Identify whether the conductor is aluminum, ACSR, or another compatible aluminum alloy construction.
2. Conductor Diameter: Measure the actual conductor diameter and compare it with the selected NLL model’s gripping range.
3. Mechanical Load: Confirm the required ultimate tensile strength and the mechanical loading conditions of the line.
4. Hardware Compatibility: Check the dimensions and connection type of the insulator string, clevis, socket eye, and other supporting fittings.
5. Installation Conditions: Consider the pole structure, line angle, terminal arrangement, and environmental loading.
6. Product Configuration: Confirm the body material, wedge structure, bolt arrangement, and associated hardware according to the engineering drawing.
7. Final Inspection: Verify fastening condition, conductor position, component alignment, and mechanical connection after installation.
A typical installation process includes the following stages:
Step 1: Model Confirmation
Select the correct NLL model according to the conductor diameter and required mechanical rating.
Step 2: Component Inspection
Check the aluminum alloy body, wedge components, bolts, pins, and connecting hardware for visible damage or dimensional mismatch.
Step 3: Conductor Positioning
Position the conductor correctly within the designated gripping section.
Step 4: Clamp Assembly
Install the wedge and fastening components according to the manufacturer’s assembly instructions.
Step 5: Mechanical Connection
Connect the completed clamp assembly to the designated insulator string or pole line hardware.
Step 6: Final Inspection
Check the conductor seating, bolt fastening, component alignment, and supporting connection.
Installation should be carried out by qualified line construction personnel following the applicable electrical safety and utility installation procedures.
REACON focuses on material consistency, dimensional accuracy, component compatibility, and mechanical performance during the manufacturing of aluminum alloy strain clamps.
Quality control may include:
• Aluminum alloy material verification.
• Clamp body and wedge dimensional inspection.
• Bolt and connecting hardware inspection.
• Surface finish and corrosion protection checks.
• Assembly compatibility verification.
• Mechanical strength testing according to applicable specifications.
Specific inspection standards, testing procedures, and acceptance criteria can be confirmed according to customer drawings and project requirements.
Q1: What is an aluminum alloy straight strain clamp used for?
It is used to anchor aluminum and ACSR conductors at designated tension points in overhead power transmission and distribution systems.
Q2: What is the difference between an NLL strain clamp and a suspension clamp?
An NLL strain clamp is designed to secure conductors under longitudinal mechanical tension, particularly at dead-end and tension locations. A suspension clamp supports conductors at intermediate suspension points.
Q3: Can the NLL series be used for ACSR conductors?
Yes. The original REACON product description identifies aluminum, ACSR, and aluminum alloy conductors as applicable conductor types. The exact model must match the conductor diameter.
Q4: Does the bolt-type strain clamp require conductor cutting?
The bolt-type configuration is designed to secure the conductor without cutting it, helping maintain conductor continuity during installation.
Q5: What breaking load options are available?
The original NLL dimensional table lists breaking load ratings from 40 kN to 120 kN across the listed models. The exact rating must be confirmed against the selected model’s technical drawing.
Q6: What materials are used in the clamp assembly?
The main clamp body and wedge components are specified as high-strength aluminum alloy. Associated bolts, pins, and connecting fittings depend on the selected assembly configuration.
Q7: Can the clamp be reused after removal?
The original product description identifies the product as reusable after removal. Reuse should only be considered following a proper inspection confirming that all components remain suitable for service.
Q8: How do I select the correct NLL model?
Provide the conductor type, outside diameter, required mechanical strength, and connection arrangement. REACON can help identify a suitable configuration according to the technical specifications.
Q9: Can REACON provide customized strain clamp assemblies?
REACON can discuss customized configurations based on conductor dimensions, mechanical requirements, connecting hardware, and project drawings.
REACON supplies aluminum alloy strain clamps and overhead line fittings for power transmission and distribution applications.
The NLL series offers multiple configurations for aluminum and ACSR conductors, supporting different conductor diameters and mechanical load requirements.
For product selection, technical drawings, or quotations, please send your conductor specifications and project requirements to the REACON sales team.