Reacon 1×660 mm² THAL Passthrough Connector for Ultra-High Voltage Transmission Lines

Home » Products » Pole Line Hardware » Strain Clamp And Suspension Clamp » Reacon 1×660 mm² THAL Passthrough Connector for Ultra-High Voltage Transmission Lines

1×660 mm² THAL Passthrough Connector for Ultra-High Voltage (UHV) Transmission Lines

Share to:

Reacon 1×660 mm² THAL Passthrough Connector for Ultra-High Voltage Transmission Lines

The 1×660 mm² THAL Passthrough Connector is a heavy-duty line fitting specially designed for Ultra-High Voltage (UHV) transmission systems. It is used for continuous conductor connection without cutting the main conductor, ensuring stable current flow and mechanical strength on long-span overhead lines. Manufactured from high-conductivity aluminum alloy, this connector is engineered to handle extremely high current loads while maintaining low electrical resistance and excellent thermal performance under UHV operating conditions.

Availability:

Quantity:



Inquire Add to Basket

1×660 mm² THAL passthrough connector UHV passthrough connector THAL conductor connector for transmission lines 660mm² conductor connection fitting ultra high voltage transmission connector overhead line passthrough fitting UHV conductor splice connector high voltage conductor hardware fitting power transmission line connector electrical conductor passthrough clamp

Product Description

1×660 mm² THAL Passthrough Connector

Product Description：

The 1×660 mm² THAL Passthrough Connector is developed for ultra-high voltage transmission systems where conductor stability and reliable current transfer are critical. It is mainly used on overhead transmission lines carrying large-capacity electrical loads across long-distance grid networks.

This connector is suitable for THAL conductors and is designed to maintain consistent electrical contact while reducing resistance at the connection point. Its structure helps improve transmission efficiency and supports stable operation under high mechanical tension conditions.

The fitting is manufactured using precision machining technology to ensure accurate conductor matching and dependable installation performance in demanding transmission environments.

Special Marking – UHV Application:

• Designed specifically for Ultra-High Voltage (UHV) transmission projects

• Suitable for large cross-section conductors (1×660 mm²)

• Meets mechanical and electrical requirements of UHV lines

Product Features

Designed for 1×660 mm² THAL conductors
Stable electrical conductivity for UHV systems
Low contact resistance structure
Strong mechanical holding performance
Suitable for high-load transmission projects
Corrosion-resistant surface treatment
Reliable outdoor operation under changing climate conditions
Precision-processed conductor fitting structure

Ultra-high voltage transmission line connector fitting package Heavy duty passthrough fitting for 660mm² conductors UHV conductor connector for overhead power transmission systems package

Application Areas

The passthrough connector is commonly installed in:

Ultra-high voltage transmission networks
Long-distance overhead power lines
National grid expansion projects
Utility transmission infrastructure
High-capacity conductor connection systems
Power interconnection engineering projects

Product Advantages

For ultra-high voltage transmission projects, connector stability directly affects line reliability. The THAL passthrough connector is designed to maintain stable conductor contact during long-term operation while helping reduce energy loss caused by poor electrical connection.

Its reinforced structure also improves installation stability in overhead transmission environments exposed to wind load, temperature variation, and continuous mechanical stress.

Technical Specifications

Product Name	1×660 mm² THAL Passthrough Connector
Conductor Type	THAL
Conductor Size	1×660 mm²
Application	Ultra-High Voltage Transmission Lines
Material	Aluminum Alloy / Customized
Surface Treatment	Corrosion Resistant Finish
Installation	Overhead Transmission System
OEM Service	Available

Safety & Quality Assurance

Manufactured under strict UHV project quality control procedures
Electrical resistance tested to ensure ultra-low contact resistance
Mechanical tensile and slip tests meet UHV conductor load requirements
Thermal cycling tests conducted under high-current conditions
Dimensional precision verified for large cross-section conductors
Material traceability and batch inspection available upon request

1×660 mm² THAL passthrough connector specification table

Why Choose Reacon

Reacon supplies transmission line fittings and conductor connection hardware for utility and power grid projects. We focus on stable product quality, precise manufacturing standards, and practical engineering performance for modern transmission systems.Customized production and technical support are available according to project requirements and conductor specifications.

FAQ

Q1: What is a THAL passthrough connector used for?

A1: It is used to connect THAL conductors in ultra-high voltage transmission systems and maintain stable electrical continuity across transmission lines.

Q2: Is the connector suitable for outdoor transmission projects?

A2: Yes. The connector is designed for overhead transmission environments and performs reliably under outdoor operating conditions.

Q3: What conductor size is supported?

A3: This model is designed for 1×660 mm² THAL conductors.

Q4: Can customized specifications be produced?

A4: Yes. Reacon supports customized production based on conductor type, project requirements, and technical drawings.

Q5: What are the main benefits of this connector?

A5: The connector provides stable conductivity, secure mechanical connection, and reduced resistance for high-capacity transmission systems.