Porcelain insulators are insulators made of electrical ceramics as insulation components. Electrical ceramics are baked from quartz, feldspar, and clay as raw materials. The surface of porcelain insulators is usually covered with porcelain glaze to improve their mechanical strength, prevent water infiltration, and increase surface smoothness.
Zinc oxide lightning arrester is a lightning arrester with good protective performance. Utilizing the excellent nonlinear volt-ampere characteristics of zinc oxide, the current flowing through the lightning arrester at normal operating voltage is extremely small (microampere or milliampere level); When overvoltage occurs, the resistance drops sharply, releasing the energy of overvoltage to achieve protection.
Suspension clamp is a hardware device that suspends the grounding wire to the suspension insulator string or hardware string.The body is made of UV resistant,glass fiber reinforced synthetic material.The insulated neutral messager is secured by the notched tightening lever.It is used for suspending the low voltage A.B.C.(Aerial bundled conductors)
Preformed Guy Grips is a common metal product mainly used in industries such as electrical equipment, communication equipment, and mechanical equipment. According to their different materials, structures, and uses, Preformed Guy Grips can be classified into various types.
Fuse Link in the circuit system mainly serve as overload protection. If the fuse Link is correctly placed in the circuit, it will fuse Link and cut off the current when the current abnormally rises to a certain height and heat, protecting the safe operation of the circuit
Terminals refer to wiring terminals, also known as wiring terminals, which can be classified into single hole, double hole, socket, hook, etc. In terms of materials, they can be silver plated copper, zinc plated copper, copper, aluminum, iron, etc. Their main function is to transmit electrical signals or conduct electricity.
Bolted copper lugs are widely used for secure cable-to-equipment connections, offering high conductivity and excellent mechanical strength for easy installation and maintenance.
Zinc oxide surge arrester is a lightning protection device with superior protection performance, light weight, pollution resistance and stable performance. It mainly uses the good non-linear volt-ampere characteristics of zinc oxide to make the current flowing through the surge arrester at normal working voltage very small (microamp or milliampere level); when the overvoltage acts, the resistance drops sharply, venting the overvoltage Energy to achieve the effect of protection. The difference between this kind of lightning arrester and the traditional lightning arrester is that it has no discharge gap, and uses the non-linear characteristics of zinc oxide to discharge and break.
Zinc oxide lightning arrester is a lightning arrester with good protective performance. By utilizing the excellent nonlinear volt ampere characteristics of zinc oxide, the current flowing through the lightning arrester at normal operating voltage is minimized; When overvoltage occurs, the resistance drops sharply, releasing the energy of the overvoltage to achieve protection.
The galvanized single steel wires or stranded steel wires are suitable for cores of ACSR to improve its tensile strength. And they can also be used in the aerial transmission line as the line material of ground connection to avoid the lightning strike. Messenger Wire, Overhead Ground or Static Wire, Guy Wire.
Low-voltage ABC cable, designed for overhead power lines and room entrance wires with a rated AC pressure of 1kv and below. It has less installation, maintenance, and operating costs, which can achieve greater economic loss and provide higher security and reliability.
RE Pole Top Pin has ANSl Standard cast lead thread.These pressed Steel Pins are mounted with the flat side of the channel section against the pole with 5/8 inch machine bolt. Hot Dip Galvanized SteelMaterial
The Hot Dip Galvanized ASTM A153 Crossarm Pin is a critical component in overhead power line systems, designed to securely support pin-type insulators on crossarms. Forged from high-strength steel and hot-dip galvanized per ASTM A153 standards, this pin offers exceptional durability and corrosion resistance, ensuring reliable performance in various environmental conditions.
The Pole Top Pin Separator is designed to provide stable support and insulation separation for pin-type insulators on utility poles. Manufactured from hot-dip galvanized steel conforming to ASTM A153, this hardware ensures outstanding corrosion resistance and long-term durability in harsh weather conditions. It’s widely used in overhead distribution systems to enhance electrical safety and structural reliability.
This high strength multi-functional industrial bracket is precision-machined from premium aluminum alloy, ensuring excellent corrosion resistance and anti-deformation properties. It is designed for a wide range of applications including machinery, electronic devices, and display systems, providing reliable support and long-lasting performance. Whether used indoors or outdoors, this bracket delivers robust mounting solutions tailored to the demands of modern industrial installations.
This high strength multi-functional industrial bracket is precision-machined from premium aluminum alloy, ensuring excellent corrosion resistance and anti-deformation properties. It is designed for a wide range of applications including machinery, electronic devices, and display systems, providing reliable support and long-lasting performance. Whether used indoors or outdoors, this bracket delivers robust mounting solutions tailored to the demands of modern industrial installations.
RE Secondary bracket is used for secondary line deadends or line pull.lt has a mounting hole for one 5/8 inch machine bolt and two staggered side holes for ½ inch lag screw. These Secondary Pulley Brackets is used in the downright pulley position for stringing of secondary line conductors.The 90 degree slot in the base make it possible to rotate the bracket into the clevis position before or after the conductor is tied to the spool.
These Clamps are designed to adapt to circular and octagonal concrete steel pole.Alternatively can be adapted to wood polws at the end user option. The C0150H clamps are heavy duty type band.They are designed with forgrd reiforcing rib/stiffener on its corner bond for extra flexural strength,used for attaching brace for heavy primary line cross arm or side arm construction. The C0150 series are used for light cross arm or side arm primary line construction. Both clamps can be used for attaching extension arm,aerial cable attachment on straight run,attaching cable on corner run,down guying or deadend guying application.
